headlines
Model2596
support

Model 1953 Dynamic Focus CRT High Voltage Power Supply

  • Five outputs: anode, focus, G1, G2 and Dynamic Focus
  • Low line and load regulation of high voltage outputs
  • All outputs short circuit and arc protected - arc and short recovery tested
  • Remotely programmed shutdown for each output
  • Each output is current and voltage limited
  • Very good cross regulation
  • Very low cross talk ripple
  • Low temperature coefficient

support

Model 1953 boasts 5 outputs: anode, focus, G1, G2 and Dynamic Focus. Each output is short circuit and arc protected and recovery tested. Remotely programmed shutdown accompanies each output. Model 1953 has excellent cross talk regulation and low cross talk ripple.

support
Voltage
Input Voltage 28 VDC ± 10%
Input current 0.8 A maximum
Anode
Output voltage 18 kV ± 360 V
Output current 300 uA
Line regulation 9 V maximum for ± 10% of input voltage change
Static load regulation 9 V maximum for no-load to full load swing
Dynamic load regulation 50 V p-p maximum
Output ripple 4 V p-p at full load
Time stability Maximum 9 V in 8 hours
Temperature coefficient 100 ppm/°C
High voltage connector LGH type (AMP 858868-1 or equivalent
Focus
Output voltage 3.25 - 5.4 kV± 40 V
Output current 25 uA
Line regulation 9 V maximum for ± 10% of input voltage change
Static load regulation 2 V maximum for no-load to full load swing
Dynamic load regulation 32 V p-p maximum
Output ripple 6 V p-p at full load
Time Stability Maximum 2 V in 8 hours
Temperature coefficient 100 ppm/ °C
High voltage connector LGH type (AMP 858855-1 or equivalent)
Dynamic Focus
Input voltage 0 - 10 V
Output voltage 0 - 300 V
Modulation frequency 3 kHz
Input resistance 2.5 Mega Ohms
Propagation time delay <0.5 us
Positive slew rate 55 V/us
Negative slew rate 55 V/us
G1
Output voltage Temperature coefficient
Output current 1 mA
Line regulation 0.2 V maximum for 10% of input voltage change
Load regulation 1 V maximum for no-load to full load swing
Output ripple 0.2 V p-p at full load
Time stability Maximum 1 V in 8 hours
Temperature coefficient 500 ppm/ °C
G2
Output voltage 350 - 750 V±5 V potentiometer adjustable
Output current 30 mA
Line regulation 0.5 V maximum for ± 10% of input voltage change
Load regulation 2.75 V maximum for no-load to full load swing
Output ripple 1.5V p-p at full load
Time stability Maximum 2.5 V in 8 hours
Temperature coefficient 100 ppm/°C
Output connector LGH type (AMP 830200-1 or equivalent)

support
sales
Model 1848 Call CPS for availability