Model 2594-10 10 kV Ion Beam Power Supply

10 kV anode output
Very low ripple
Low temperature coefficient
Low stored energy
Wide output voltage range
Excellent stability
Separate ground for case, signal and power

CPS Model 2594-10 sets the standard for high performance in modular high voltage power supplies. Standard 10 kV configuration can be either positive or negative polarity. Model 2594-10 delivers exceptional performance in all critical power supply parameters such as ripple, stability, temperature coefficient and regulation.

Low ripple is achieved with active ripple rejection circuits. The advantages of this design include a lower stored energy, compact packaging and improved reliability shoud arcing occur.

The exceptional stability and low temperature coefficient of the 2594-10 are the result of careful design practice and the selection of quality components throughout.

Model 2594 Series Manual

Output voltage	0.010 to 10 kV
Output current	5 mA
Line regulation	0.001%
Load regulation	0.001%
Output ripple	<100 mV peak-to-peak at 10 kV, 5 mA
Time stability	0.005% in 1 hour, 0.01% in 8 hours
Temperature coefficient	20 ppm/C
Input power	24 VDC, 2.8 A
Operating temperature range	0 to 50C
Voltage metering	1 V per 10 kV output
Current metering	1 V per 0.5 mA output