Shopping cart
POWER SUPPLIES UP TO 10 MA
Power Supplies

Model 2591 — Single output high voltage power supply

  • Single output +0.01 to +30 kV
  • Output ripple under 200 mV p–p at 500 μA
  • Temperature coefficient under 25 ppm/°C
  • Stored energy under 1 J
  • Low reflected ripple on input power line
  • Separate connections for HV output, cable shield, and programming reference
  • Compact enclosure: 6.0 × 2.1 × 3.7 in.
  • Commonly used in focused ion beam systems
Model 2591

Model 2593 — Single output high voltage power supply

  • Single output 0 to +15 kV or 0 to −15 kV
  • Output ripple under 200 mV peak-to-peak
  • Temperature coefficient under 50 ppm/°C
  • Stored energy under 0.1 J at 15 kV
  • Low reflected ripple on input power line
  • Compact case size
  • Overvoltage and overcurrent limited
  • Short-circuit and arc protected
  • Automatic output voltage recovery following arcs and short circuits
  • Common applications include electron beam, ion beam, and X-ray generators
Model 2593

Model 2594-10 — Single output unipolar high voltage power supply

  • 10 kV anode output
  • Low ripple
  • Low temperature coefficient
  • Low stored energy
  • Wide output voltage range
  • Excellent stability
  • Separate ground for case, signal, and power
  • Common applications include ion beam generation
Model 2594-10

Model XPS50P50 — X-ray power supply, anode + filament

  • Anode voltage +2 kV to +50 kV
  • Integrated anode and filament power supplies
  • Programmable anode voltage and beam current
  • High stability beam control
  • Local and remote control modes
  • Safety interlock input
  • Meter outputs for beam current and HV
  • Overvoltage, arc and short circuit protection
Model XPS50P50

Model 2596 — Quad unipolar output precision high voltage power supply

  • Up to 30 kV positive or negative outputs
  • Up to 200 μA (200–1000 μA options available upon request)
  • Output noise and ripple under 200 mV p–p at full load for each output
  • Independent programming, voltage, and current metering
  • Output voltage stability under 10 ppm/hr
  • Temperature coefficient under 10 ppm/°C
  • Excellent load and line regulation (0.001%)
  • Outstanding slew rate (over 35 V/ms) without voltage overshoots
  • Standard 19″ rack enclosure
  • Shielded high voltage CPS output connectors
  • Arc and short protected, overcurrent and overvoltage limited
  • AC line voltage input
Model 2596

Model 5003 — Unipolar (positive or negative) high voltage power supply

  • Single output 0 to +2 kV or 0 to −2 kV
  • Low output ripple
  • Arc and short circuit proof
  • Positive or negative output
  • Internal and external programming
  • Output voltage metering
  • DC or AC line input models
  • Ideal for photomultiplier tubes
Model 5003
 
Help

I didn't find what I need

Call us and let our knowledgeable staff help you find exactly what you need.

Need a custom solution? You've come to the right place! CPS has been designing and manufacturing custom high voltage equipment for 30+ years.


Tell us what you need