Model 5003, 2 kV Photomultiplier Supply
- Very low output ripple (<300 mV p-p at full load at 50 kV and 500 uA)
- Positive or negative outputs
- < 5 mV peak-to-peak output ripple
- Internal or external programming
- Metering outputs for current and voltage
- DC or AC line input models
Model 5003 is a reliable, modular power supply for single and multiple high voltage output requirements to operate photomultiplier tubes. Provides output voltages adjustable to 2 kV, and up to 20 mA current with positive or negative polarity. Ripple is less than 5 mV. Model 5003 comes in 5, 10, and 20 mA versions.
Model 5003 Manual
| Input power | 24VDC |
| Input current | Maximum 0.3 A rms at 120 V rms |
| Output voltage | Adjustable up to 50 kV maximum |
| Output current | 500 uA maximum |
| Line regulation | 0.005% for ± 10% change of input voltage |
| Load regulation | 0.005% for full swing from no-load to full load |
| Output voltage noise and ripple | Maximum 300 MVp-p at 50 uA load |
| Time stability | 0.005% in 1 our, 0.01% in 8 hours |
| Operating temperature | 0 to 50°C |
| Temperature coefficient | <50 ppm/°C |
| Output connector | CPS connector HVC 150 (CATON LGG 41 optional) |
| Program voltage | 5 V for full scale output (10 V optional) |
| Voltage metering | 1 V per 10 kV output |
| Current metering | 1 V per 100uA output |
| Time stability | 0.005% in 1 our, 0.01% in 8 hours |
| Operating temperature | 0 to 50°C |
| Temperature coefficient | <50 ppm/°C |
| Output connector | CPS connector HVC 150 (CATON LGG 41 optional) |
| Program voltage | 5 V for full scale output (10 V optional) |
| Voltage metering | 1 V per 10 kV output |
| Current metering | 1 V per 100uA output |
| Model 5003 AC | Qty 1. $891 | Qty2-9. $810 |
| Model 5003 DC | Qty 1. $590 | Qty2-9. $536 |