Model 6001 | SEM Supply and X-Ray Tube Power Supply

• -30 kV very stable electron beam supply
• Arc and short circuit protected
• 5 A integrated filament supply floating at beam potential
• Remote programming of beam voltage
• Metering of beam voltage, beam current and filament current

The Model 6001 is manufactured for scanning electron microscopes and X-ray tubes that require -30 kV of accelerating voltage. A filament supply, referenced to the high voltage, is integrated into 6001's isolated enclosure. The bias voltage can be adjusted between the filament and grid potential (from -30 kV to -35 kV) to additionally adjust beam current to a required value. Digital or analog front panel meters are available to measure beam voltage, beam current and filament current. Two ten-turn control potentiometers allow fine adjustments of beam voltage and filament current. Remote controlling mode uses a 5 K potentiometer to adjust the beam voltage between 0 and -30 kV.