headlines
Model2596
Products
support

Model HPV-500 100kV Precision Divider Probe Features

  • High accuracy - 0.01% typical
  • Input voltages to 100 kV DC
  • 200 mVpp at full load for each output
  • Low temp. coeff. <50 ppm/C
  • Probe Accessories

support

The HVP-500 high voltage probe is an accurate tool for calibrating, monitoring and testing high voltage power supplies, CRT display systems, microwave systems, nuclear instrumentation and other high voltage equipment.

The divider probe is only 20 inches long, weighs 2.6 lbs., and utilizes CPS’ unique epoxy encapsulation process to provide a safe, yet manageable device. Model HVP-500 is designed for use with high impedance voltmeters. Divider ratios of 1,000:1 and 10,000:1 are available. Circuit loading is 2,000 MOhm.


Accessories
Standard accessories include two tips, a corona ball and a pointed tip. A hook style tip is optional.
support
Input voltage 100 kV DC (maximum)
Standard ratios 1,000:1 (100 kV in, 100 V out) & 10,000:1 (100 kV in, 10 V out)
Input impedance 2,000 MOhm
Temperature Coefficient 40 ppm per C (typical)
Weight 2.6 lbs.
Length 20 in.
Output connector BNC
Optional tip Hook shape
 
Model Calibration Ratio Meter Requirements
HPV-500 0500-00-0005 >10 GOhm 10,000 : 1 High quality bench top meter
HPV-5000500-00-0012 10 MOhm 1,000 : 1 Small hand held meter
Please note: All probes are factory calibrated at increments of 10kV. If calibration needed is different from factory standard, this must be stated when ordering probe.
sales
Model HVP-500 Qty 1. $819   Qty2-9. $745
Probe tip corona ball Qty 1. $46.80   Qty2-9. $46.80
Probe tip Qty 1. $18.45   Qty2-9. $18.45
Probe tip - hook Qty 1. $13.50   Qty2-9. $13.50